WIRELESS COMMUNICATION (SUMMER-2019)(ENTC)(CGS) B.E. EIGHT SIMESTER SOLVED QUESTION PAPER

WIRELESS COMMUNICATION (SUMMER-2019) (ENTC) (CGS) B.E. EIGHTH SEMESTER SOLVED QUESTION PAPER

LIST OF QUESTIONS

• 1. Explain 2nd and 3rd generation mobile telephone system based on different parameters associated with mobile communication.
• 2. What is frequency reuse or frequency planning? How is more capacity achieved if the cluster size is reduced while the cell size is kept constant to locate co-channel cell?
• 3. What is handoff? Explain the types of handoff in detail.
• 4. What is roaming? How is a landline phone call delivered/connected to a mobile subscriber?
• 5. What are the sources of interference in a cellular radio system? Explain co-channel and adjacent-channel interference.
• 6. What are the techniques to expand the capacity of a cellular system? Explain any two techniques in detail.
• 7. What is trunking? Explain blocked call cleared and blocked calls delayed trunking.
• 8. If an S/I ratio of 15 dB is required for satisfactory forward channel performance of a cellular system, what is the frequency reuse factor and cluster size that should be used for minimum capacity if the path loss exponent is a) n = 4, b) n = 3? Assume that there are 6 co-channel cells in the first tier, and all of them are at the same distance from the mobile. Use suitable approximation.
• 9. What is fading? What are the different types of small-scale fading? Explain any two in detail.
• 10. Describe Doppler spread and coherence time.
• 11. What are multipath waves? Explain their effect on signal quality.
• 12. What are the factors influencing small-scale fading?
• 13. Explain with a neat diagram the operations of GSM from the transmitter to the receiver.
• 14. Explain a mobile call origination in GSM.
• 15. Explain the different channels available in GSM.
• 16. Draw and explain the GSM frame structure.
• 17. Explain frequency and channel specifications in IS-95.
• 18. Explain the following blocks of the forward CDMA channel modulation process:
  • i) Long PN sequence
  • ii) Data scrambler
  • iii) Power control subchannel
• 19. Explain power control in CDMA. Also, explain briefly the open-loop and closed-loop mechanisms in power control.
• 20. Draw the block diagram and explain the reverse IS-95 channel modulation.
• 21. Explain Bluetooth terminology, technologies, and features.
• 22. What is ZigBee technology? Explain its features and technical specifications.
• 23. Explain Wi-Fi architecture and features.
• 24. Draw and explain the WAP architecture.

1. Explain 2nd and 3rd generation mobile telephone system based on different parameters associated with mobile communication.

2nd Generation (2G) Mobile Telephone System:

• Introduced digital technology for mobile communication, replacing analog systems used in 1G.
• Parameters:
  • Frequency Division Multiple Access (FDMA): Divides available frequency spectrum into channels for multiple users.
  • Time Division Multiple Access (TDMA): Divides each channel into time slots for users to share the same frequency.
  • Circuit-Switched Data (CSD): Provides data transmission over the voice channel by reserving dedicated resources.
  • Enhanced Data Rates for GSM Evolution (EDGE): Extension of 2G GSM for higher data rates.

3rd Generation (3G) Mobile Telephone System:

• Enabled multimedia services and higher data rates.
• Parameters:
  • Wideband Code Division Multiple Access (WCDMA): Uses wider bandwidth for higher data rates and capacity.
  • CDMA2000: 3G standards based on CDMA, offering high-speed data and voice.
  • Universal Mobile Telecommunications System (UMTS): Combines WCDMA with GSM core for global roaming.
  • High-Speed Packet Access (HSPA): Upgrade to 3G for improved data rates.

2. What is frequency reuse or frequency planning? How is more capacity achieved if the cluster size is reduced while the cell size is kept constant to locate co-channel cell?

Frequency reuse (frequency planning) maximizes spectrum utilization by dividing available spectrum into bands assigned to different cells. The same frequencies are reused in non-adjacent cells to increase capacity. Reducing cluster size (more clusters in the same area) increases the number of co-channel cells, allowing more simultaneous connections and higher capacity, as interference is managed by careful planning.

3. What is handoff? Explain the types of handoff in detail.

Handoff (handover) is the process of transferring an ongoing call or data session from one base station/cell to another as a mobile device moves. Types:

• Intra-cell handoff: Within the same cell, between channels/time slots.
• Inter-cell handoff: Between different cells, possibly different base stations.
• Inter-system handoff: Between different cellular systems or network generations.

Handoff ensures uninterrupted communication as users move.

4. What is roaming? How is a landline phone call delivered/connected to a mobile subscriber?

Roaming allows mobile subscribers to use their devices outside their home network. Landline calls to a mobile are routed via PSTN to the mobile's home network, which locates the subscriber via HLR/VLR and forwards the call to the current serving MSC, which pages and connects the call to the mobile device.

5. What are the sources of interference in a cellular radio system? Explain co-channel and adjacent-channel interference.

In a cellular radio system, several sources of interference can affect the quality and performance of communication. The two common types of interference are co-channel interference and adjacent-channel interference.

Sources of Interference in a Cellular Radio System:

• Co-Channel Interference: Occurs when two or more cells within a cellular system use the same frequency channel. It can arise due to the limited availability of frequency spectrum and the need for frequency reuse. The main sources of co-channel interference include:
  • Co-Channel Cells: Cells that share the same frequency channels but are geographically close to each other can cause interference due to signal overlap and limited separation.
  • Signal Propagation: Signals from co-channel cells can experience interference due to multi-path propagation, where signals take different paths and arrive at the receiver with different delays and phases.
  • Cell Load: High user density or heavy traffic within a cell can lead to increased interference as the available resources are shared among multiple users.
• Adjacent-Channel Interference: Occurs when the frequency channels used by neighboring cells are closely spaced. It can occur due to imperfect filtering or limitations in frequency selectivity. The main sources of adjacent-channel interference include:
  • Frequency Leakage: Imperfect filtering in the transmitter or receiver can result in frequency leakage, causing signals from adjacent channels to interfere with the desired channel.
  • Frequency Reuse Patterns: If adjacent cells use frequency channels that are close to each other in the frequency spectrum, there is a higher probability of adjacent-channel interference.
  • Receiver Sensitivity: The receiver's ability to reject signals from adjacent channels determines its vulnerability to adjacent-channel interference.

Co-Channel Interference:

Co-channel interference is caused by the use of the same frequency channels in adjacent cells. When two cells use the same frequency channel, interference can occur if the cells are not sufficiently far apart to prevent signal overlap. This interference can degrade the signal quality and result in dropped calls, reduced data rates, and decreased overall capacity. To mitigate co-channel interference, techniques like proper cell planning, careful frequency allocation, and efficient power control are employed.

Adjacent-Channel Interference:

Adjacent-channel interference occurs when cells use frequency channels that are closely spaced. This interference arises due to the limitations in frequency selectivity and imperfect filtering. The interference can result in degradation of the signal quality and increased error rates. To minimize adjacent-channel interference, techniques like improved frequency planning, appropriate guard bands between adjacent channels, and advanced filtering in transmitters and receivers are utilized.

Overall, managing co-channel and adjacent-channel interference is crucial in cellular radio systems to ensure optimal performance, efficient frequency utilization, and reliable communication for mobile users.

6. What are the techniques to expand the capacity of a cellular system? Explain any two techniques in detail.

Expanding the capacity of a cellular system is essential to accommodate the increasing demand for mobile communication services. Several techniques are employed to enhance capacity and improve the efficiency of cellular systems. Here, two commonly used techniques are discussed in detail:

• Frequency Reuse:

  Frequency reuse is a fundamental technique to increase capacity in a cellular system. It involves dividing the available frequency spectrum into smaller frequency bands and allocating them to different cells within the network. By reusing frequencies in a pattern across cells, multiple cells can operate simultaneously without causing excessive interference.

  The key concept in frequency reuse is to minimize interference between co-channel cells. The system utilizes a cluster pattern, where a group of cells form a cluster, and the same set of frequencies is reused in non-adjacent clusters. The size of the cluster and the reuse distance between clusters are determined based on factors like signal propagation characteristics, interference levels, and system capacity requirements.

  By reusing frequencies, the overall capacity of the cellular system increases. It allows more users to be served simultaneously and provides improved coverage and network availability. However, careful planning and optimization are required to balance the trade-off between frequency reuse and interference control.

• Sectorization:

  Sectorization is a technique that divides a cell into multiple sectors, each serving a specific angular sector of the cell coverage area. Instead of using a single omnidirectional antenna, sectorization involves deploying multiple directional antennas, each covering a specific sector.

  Sectorization offers several benefits for capacity expansion:

  • Increased Frequency Reuse: By using directional antennas, the same set of frequencies can be reused in adjacent sectors of the same cell without causing interference. This leads to improved frequency utilization and increased capacity.
  • Spatial Reuse: With sectorization, neighboring cells can use the same frequency channels as long as they are in different sectors. This allows for more efficient spatial reuse of frequencies and enhances capacity.
  • Interference Mitigation: By directing the antenna beams towards the desired coverage areas, sectorization helps reduce interference from adjacent cells. This results in improved signal quality, reduced interference levels, and enhanced system capacity.

  Sectorization is particularly beneficial in areas with high user density or areas with asymmetric traffic patterns. It allows the cellular network to focus resources and capacity where they are needed the most, providing better coverage, higher data rates, and improved quality of service.

These two techniques, frequency reuse and sectorization, are crucial for expanding the capacity of cellular systems. By effectively managing frequency allocation, interference control, and resource utilization, these techniques help meet the increasing demands of mobile communication services and provide a better user experience.

7. What is trunking? Explain blocked call cleared and blocked calls delayed trunking.

Trunking is a technique used in telecommunications to efficiently manage and allocate a limited number of communication channels to a large number of users. It is commonly employed in systems where the number of available channels is less than the number of potential users, such as in a cellular network.

Blocked Call Cleared Trunking:

Blocked Call Cleared (BCC) trunking is a method that aims to minimize call blocking in a system with limited channels. When a user attempts to make a call but all channels are currently busy, the BCC trunking technique temporarily blocks the call. However, it periodically rechecks the availability of channels and clears previously blocked calls as soon as a channel becomes free. This ensures that blocked calls are serviced as quickly as possible, minimizing call blocking probability.

BCC trunking utilizes a queuing mechanism to hold blocked calls until a channel becomes available. The blocked calls are prioritized based on factors like call duration, urgency, or user priority. Once a channel becomes free, the highest-priority blocked call is selected and given access to the available channel. This process continues until all blocked calls are cleared.

Blocked Calls Delayed Trunking:

Blocked Calls Delayed (BCD) trunking is another method used to manage limited communication channels. In BCD trunking, when a user attempts to make a call but all channels are busy, the call is delayed and placed in a queue until a channel becomes available. Unlike BCC trunking, blocked calls are not immediately cleared as soon as a channel becomes free.

In BCD trunking, blocked calls are held in a queue and serviced in the order they arrived, regardless of call priority. The call blocking probability may be relatively higher in BCD trunking compared to BCC trunking since blocked calls are not cleared as quickly. However, it is a simpler and less resource-intensive method as it does not require frequent checking for channel availability.

BCD trunking can be suitable for systems where the call duration is generally short or where the cost of call queuing is relatively low. It allows for efficient channel utilization by delaying blocked calls until channels are available, effectively managing the limited resources.

Both BCC trunking and BCD trunking are strategies to optimize channel allocation and minimize call blocking in systems with limited capacity. The choice between these techniques depends on factors such as system requirements, traffic patterns, and resource availability.

8. If an S/I ratio of 15 dB is required for satisfactory forward channel performance of a cellular system, what is the frequency reuse factor and cluster size that should be used for minimum capacity if the path loss exponent is a) n = 4, b) n = 3? Assume that there are 6 co-channel cells in the first tier, and all of them are at the same distance from the mobile. Use suitable approximation.

To determine the frequency reuse factor (N) and cluster size (K) for minimum capacity, we can use the formula:

N = 1 / (1 - 1/K)

where N represents the frequency reuse factor and K represents the cluster size.

Given that there are 6 co-channel cells in the first tier, we can calculate the cluster size as follows:

K = 6

a) For path loss exponent n = 4:

S/I ratio (Signal-to-Interference ratio) = 15 dB

To calculate the frequency reuse factor (N), we need to find the interference power (I) relative to the signal power (S) in linear scale:

S/I = 10^(15/10) = 31.62 (approx.)

Next, we can use the formula:

N = 1 / (1 - 1/K)

N = 1 / (1 - 1/6) = 1.2 (approx.)

Therefore, for n = 4, the frequency reuse factor (N) should be approximately 1.2, and the cluster size (K) is 6.

b) For path loss exponent n = 3:

S/I ratio (Signal-to-Interference ratio) = 15 dB

Following the same steps as above:

S/I = 10^(15/10) = 31.62 (approx.)

N = 1 / (1 - 1/6) = 1.2 (approx.)

Therefore, for n = 3, the frequency reuse factor (N) should be approximately 1.2, and the cluster size (K) is 6.

In both cases, regardless of the path loss exponent, the frequency reuse factor (N) is approximately 1.2, and the cluster size (K) is 6. This configuration allows for the minimum capacity while satisfying the required S/I ratio of 15 dB for satisfactory forward channel performance.

9. What is fading? What are the different types of small-scale fading? Explain any two in detail.

Fading refers to the phenomenon of signal attenuation or variations in the strength or quality of a radio signal as it propagates through a wireless channel. It occurs due to changes in the propagation environment, such as reflections, diffraction, and scattering, which cause multiple copies of the transmitted signal to arrive at the receiver with different amplitudes, phases, and delays. Fading can result in signal fading in and out, increased bit error rates, and overall degradation of the communication link.

There are two main types of small-scale fading:

• Rayleigh Fading: Occurs when there are multiple reflected or scattered copies of the transmitted signal reaching the receiver. These copies combine randomly and destructively, leading to fluctuations in signal amplitude. Rayleigh fading is commonly observed in urban environments with numerous obstructions and multipath propagation. The fading effect follows a Rayleigh distribution, characterized by a probability density function that describes the amplitude variations of the received signal.
• Rician Fading: Occurs when both the line-of-sight (LOS) and scattered components of the transmitted signal are present at the receiver. It is often observed in environments where a strong dominant path exists alongside weaker scattered paths, such as in open areas with limited obstructions. Rician fading can be seen as a combination of the direct LOS component and multipath propagation, resulting in a more controlled variation of the received signal.

In summary, fading is a common phenomenon in wireless communication where signal strength and quality fluctuate due to propagation effects. Rayleigh fading occurs in environments with multipath propagation and no dominant LOS component, while Rician fading occurs when both LOS and scattered components are present. Understanding these types of small-scale fading helps in designing robust wireless systems and implementing suitable mitigation techniques.

10. Describe Doppler spread and coherence time.

Doppler spread and coherence time are two important parameters used to characterize the temporal variations and fading effects in wireless communication channels.

• Doppler Spread: Doppler spread is a measure of the frequency spread caused by the relative motion between the transmitter and the receiver in a wireless communication system. It is a consequence of the Doppler effect, which occurs when there is a relative velocity between the transmitter and receiver. As a result of this relative motion, the frequency of the received signal is shifted, leading to a spread in the received signal spectrum.
• Coherence Time: Coherence time is a measure of the temporal duration over which a wireless channel remains relatively constant or exhibits a consistent behavior. It represents the interval during which the channel's impulse response, power delay profile, or fading characteristics remain statistically unchanged.

By understanding the Doppler spread and coherence time of a wireless channel, system designers can make informed decisions regarding the selection of appropriate transmission techniques, channel models, and system parameters to optimize performance and mitigate the effects of fading and variations in mobile communication scenarios.

11. What are multipath waves? Explain their effect on signal quality.

Multipath waves are additional copies of a transmitted signal that reach the receiver through different paths due to reflections, diffraction, and scattering in the wireless propagation environment. When a signal travels from a transmitter to a receiver, it encounters various objects and surfaces that cause the signal to take different paths with different lengths and delays. These multiple paths can result in constructive or destructive interference at the receiver, leading to variations in the received signal's amplitude, phase, and arrival time.

The effects of multipath waves on signal quality can be both beneficial and detrimental. Here are some of the key effects:

• Intersymbol Interference (ISI): Occurs when multiple copies of the transmitted signal with different delays and amplitudes arrive at the receiver, overlapping in time and interfering with each other. This can cause distortion and smearing of the received signal, leading to errors in symbol detection and degradation of the bit error rate performance.
• Fading: Results in rapid fluctuations in the received signal's amplitude or power level. It can be either fast or slow, depending on the relative motion between the transmitter, receiver, and the objects causing the multipath propagation. Fading can cause signal loss or deep fades, resulting in temporary loss of communication or significant degradation in signal quality.
• Diversity Reception: Exploits multipath waves to improve signal quality. It involves using multiple antennas at the receiver to capture different copies of the transmitted signal that have experienced independent fading or multipath conditions. Combining the received signals from these antennas helps mitigate the effects of fading and multipath propagation, improving the received signal's quality and reducing fading-induced errors.
• Channel Estimation: The presence of multipath waves makes accurate channel estimation more complex. Estimating the characteristics of the wireless channel, such as the channel impulse response or frequency response, becomes challenging due to the multiple paths with varying delays, attenuations, and phase shifts. Accurate channel estimation is crucial for advanced communication techniques like equalization, adaptive modulation, and beamforming.

In summary, multipath waves are additional copies of a transmitted signal that reach the receiver through different paths. They can cause intersymbol interference, fading, and challenges in channel estimation. However, they can also be exploited through diversity reception techniques to enhance signal quality. Understanding and mitigating the effects of multipath waves are crucial for designing robust wireless communication systems and ensuring reliable transmission in challenging propagation environments.

12. What are the factors influencing small-scale fading?

Small-scale fading is the rapid variation in the received signal strength or quality over short distances or time intervals, typically caused by multipath propagation. Several factors contribute to small-scale fading, including:

• Multipath Propagation: Signals reach the receiver via multiple paths due to reflections, diffraction, and scattering caused by objects and the surrounding environment. The interaction of these multipath signals at the receiver can lead to constructive or destructive interference, resulting in variations in the received signal's amplitude, phase, and timing.
• Path Loss: The attenuation of the signal power as it propagates through the wireless channel, influenced by factors such as the distance between the transmitter and receiver, the operating frequency, and the characteristics of the propagation environment. Variations in path loss contribute to the fluctuations in the received signal strength and can lead to small-scale fading.
• Doppler Effect: Caused by the relative motion between the transmitter, receiver, and surrounding objects, leading to a shift in the frequency of the received signal. The Doppler effect introduces variations in the received signal's frequency, impacting the signal quality and contributing to small-scale fading.
• Scattering and Reflection: Scattering occurs when the transmitted signal encounters objects or irregularities in the propagation environment, causing it to scatter in various directions. Reflection refers to the bouncing of the signal off surfaces such as buildings, walls, and the ground. Both scattering and reflection contribute to the formation of multiple signal paths with different delays, amplitudes, and phases, resulting in small-scale fading.
• Shadowing: Also known as large-scale fading or path loss variation, occurs due to obstacles or large structures blocking or attenuating the signal. It results in localized areas of reduced signal strength, causing variations in the received signal's amplitude. Shadowing is often caused by buildings, trees, or terrain irregularities and can contribute to small-scale fading in specific regions.
• Transmitting and Receiving Antenna Characteristics: The properties of the transmitting and receiving antennas, such as their gain, beamwidth, and polarization, can influence small-scale fading. Different antenna configurations and orientations can interact with the multipath signals in unique ways, affecting the received signal quality and introducing variations.
• Frequency and Bandwidth: The choice of operating frequency and bandwidth also influences small-scale fading. Higher frequency signals tend to experience more significant attenuation and path loss, leading to increased fading effects. The available bandwidth affects the channel capacity and the ability to accommodate multiple signal paths, impacting the severity of small-scale fading.

Understanding these factors influencing small-scale fading is essential for designing robust wireless communication systems. Techniques such as diversity reception, equalization, adaptive modulation and coding, and channel estimation are employed to mitigate the effects of fading and ensure reliable transmission in dynamic and challenging propagation environments.

13. Explain with a neat diagram the operations of GSM from the transmitter to the receiver.

The operations of GSM (Global System for Mobile Communications) involve various stages from the transmitter to the receiver. Here is a step-by-step explanation along with a diagram:

1. Source Encoding: The audio signal or data from the source is first encoded using a speech or data codec, such as Adaptive Multi-Rate (AMR) or General Packet Radio Service (GPRS) coding. This encoding process compresses the audio or data for efficient transmission over the GSM network.
2. Channel Encoding: The encoded signal then undergoes channel encoding, which involves error detection and correction coding. Convolutional coding and cyclic redundancy check (CRC) coding are applied to add redundancy to the encoded signal for error detection and correction purposes.
3. Interleaving: Interleaving is performed on the encoded and channel-encoded signal to distribute the data across time and frequency. It helps combat burst errors caused by fading or interference in the wireless channel. The interleaving process rearranges the data bits so that consecutive bits are spread apart in time.
4. Modulation: The interleaved signal is modulated using Gaussian Minimum Shift Keying (GMSK), which is a form of digital modulation. GMSK converts the digital signal into an analog waveform that can be transmitted over the air interface. The modulation process shapes the signal's amplitude and phase to represent the digital information.
5. Radio Frequency (RF) Upconversion: The modulated signal is then mixed with a carrier frequency in the RF upconversion stage. This process translates the signal from the baseband frequency range to the desired radio frequency range for transmission.
6. Transmitter: The upconverted RF signal is amplified and filtered by the transmitter unit. It prepares the signal for transmission by amplifying its power level and removing any unwanted noise or interference.
7. Antenna and Propagation: The amplified RF signal is transmitted through the antenna, which radiates the signal into the wireless channel. The signal propagates through the air, experiencing various effects such as multipath propagation, fading, and interference.
8. Receiver and Antenna: The receiving antenna captures the transmitted signal from the air. The received signal is then passed to the receiver unit for further processing.
9. Receiver Front-End: The receiver front-end consists of various components, including filters and amplifiers, which amplify and condition the received signal. The front-end prepares the signal for further demodulation and decoding.
10. Demodulation: The received signal is demodulated using GMSK demodulation to recover the original modulated digital signal. This process extracts the digital information from the received analog waveform.
11. Deinterleaving: Deinterleaving is performed to reverse the interleaving process applied at the transmitter. It rearranges the received data bits back to their original order.
12. Channel Decoding: Channel decoding is performed to correct any errors introduced during transmission. Convolutional decoding and CRC checking are applied to detect and correct errors in the received signal.
13. Source Decoding: The channel-decoded signal is then decoded using the corresponding speech or data codec to restore the original audio or data information. The source decoding process reverses the encoding applied at the transmitter.
14. Destination: The decoded audio or data signal is sent to its intended destination, such as a user's mobile device or a network application, for further processing or playback.

Please note that this diagram provides a high-level overview of the GSM operations, and the actual implementation may involve more intricate details and additional stages.

14. Explain a mobile call origination in GSM.

Mobile call origination in GSM (Global System for Mobile Communications) refers to the process of establishing a call from a mobile device to another party. Here is a step-by-step explanation of the mobile call origination process in GSM:

1. Powering On: The mobile device is powered on, and it searches for the available GSM network. It scans the surrounding cells to detect the presence of nearby base stations and measures the signal strength of the available networks.
2. Network Selection: Based on the measured signal strength and other network parameters, the mobile device selects the most suitable GSM network to connect to. The selection is typically based on factors such as signal strength, network availability, and preferred network settings configured on the device.
3. Registration: Once the mobile device has selected a GSM network, it initiates the registration process. The device sends a registration request, known as "Location Update," to the network. This request includes information such as the device's International Mobile Subscriber Identity (IMSI), Mobile Station International ISDN Number (MSISDN), and other relevant parameters.
4. Authentication and Encryption: Upon receiving the registration request, the GSM network authenticates the mobile device's identity using the IMSI and verifies it against the subscriber's authentication data stored in the Home Location Register (HLR) or Authentication Center (AuC). If the authentication is successful, the network establishes a secure communication link with the mobile device using encryption algorithms to protect the call's privacy.
5. Location Update: After successful authentication, the network updates the location of the mobile device in the Visitor Location Register (VLR). The VLR keeps track of the mobile device's current location and other relevant information necessary for call routing and mobility management.
6. Call Setup Request: When a user initiates a call from the mobile device, it sends a call setup request to the GSM network. The request contains the dialed number or the Mobile Subscriber ISDN Number (MSISDN) of the recipient. The mobile device also includes its own identification, such as the IMSI or Temporary Mobile Subscriber Identity (TMSI).
7. Call Routing: The GSM network receives the call setup request and performs call routing based on the dialed number. It determines the location of the recipient's mobile device by querying the Home Location Register (HLR) or the Visitor Location Register (VLR). The call is then routed to the recipient's serving MSC (Mobile Switching Center).
8. Paging and Alerting: Once the recipient's serving MSC receives the call, it initiates a paging process to locate the recipient's mobile device. The serving MSC sends a paging message to the base station serving the cell where the recipient's device is currently located. The base station broadcasts the paging message, instructing the recipient's device to respond.
9. Call Establishment: Upon receiving the paging message, the recipient's mobile device responds by establishing a connection with the network. The serving MSC acknowledges the response and establishes a call path between the calling party and the recipient's mobile device.
10. Call Ringing and Answering: The recipient's mobile device rings, indicating an incoming call. If the recipient answers the call, the call is connected, and voice communication can take place between the calling party and the recipient.
11. Call Termination: When the call is completed or terminated by either party, the GSM network releases the allocated resources and updates the necessary call-related information in the relevant network databases.

The mobile call origination process in GSM involves several stages, including network selection, registration, authentication, call setup, call routing, paging, call establishment, and call termination. Each step ensures the proper connection and routing of the call between the calling party and the recipient's mobile device.

15. Explain the different channels available in GSM.

In GSM (Global System for Mobile Communications), various channels are utilized for different purposes to support voice and data communication. Here are the different channels available in GSM:

• Traffic Channels (TCH):
  • Full Rate (TCH/F): Dedicated channel with a transmission rate of 13 kbps for high-quality voice calls.
  • Half Rate (TCH/H): More efficient coding scheme allowing two TCH/H channels to share the same resources as one TCH/F channel, each with a transmission rate of 6.5 kbps.
• Control Channels: Used for signaling and control purposes in the GSM network, facilitating call establishment, maintenance, and termination, as well as mobility management. Main control channels include:
  • Broadcast Control Channel (BCCH): Carries system information for cell selection and initial cell synchronization.
  • Frequency Correction Channel (FCCH): Provides a reference frequency for mobile device's frequency synchronization.
  • Synchronization Channel (SCH): Carries synchronization information for mobile device acquisition.
  • Random Access Channel (RACH): Used by mobile devices to request access to the network or initiate call setup.
  • Access Grant Channel (AGCH): Carries the response from the network to the mobile device's RACH request, granting access to the network.
  • Paging Channel (PCH): Used by the network to notify mobile devices of incoming calls or messages.
  • Immediate Assignment Channel (IMSI): Carries the assignment information from the network to the mobile device after a call setup request or paging response.
  • Random Access Burst Channel (RACH): Used by the mobile device to respond to a paging message, initiate handover, or transmit short data bursts.
• Common Control Channels: Broadcasted by the network and shared by multiple mobile devices within a cell, used for common control signaling and coordination. Main common control channels include:
  • Common Control Channel (CCCH): Carries signaling messages related to call setup, termination, and handover initiation.
  • Broadcast Control Channel (BCCH): As mentioned earlier, broadcasts system information to all mobile devices within a cell.
  • Paging Channel (PCH): Broadcasts paging messages to notify mobile devices of incoming calls or messages.
  • Access Grant Channel (AGCH): Used for granting access to the network and assigning dedicated channels to mobile devices.
  • Random Access Channel (RACH): Used by mobile devices to request access to the network and initiate call setup.

The combination and allocation of these channels vary depending on the network configuration, traffic load, and specific requirements of the GSM operators.

16. Draw and explain the GSM frame structure.

The GSM frame structure is designed to organize and transmit the various types of information in a GSM network, including voice, data, and signaling information. The frame structure ensures efficient transmission and reception of information between the mobile station and the base station. Here is an explanation of the GSM frame structure:

The GSM frame structure is based on a time-division multiple access (TDMA) scheme, where each frame is divided into multiple time slots. The basic unit of time in the GSM frame structure is the time slot, and multiple time slots are combined to form a frame. The frame structure can be described as follows:

• Time Slot: A time slot is the smallest unit of time in the GSM frame structure, and it is allocated to individual users for transmitting their data. Each time slot has a duration of 577 microseconds.
• Frame: A frame is a combination of multiple time slots, and it is the basic unit of transmission in the GSM network. A frame has a duration of 4.615 milliseconds and consists of 8 time slots in the case of full-rate channels or 16 time slots in the case of half-rate channels.
• Multiframe: A multiframe is a combination of multiple frames, and it is used to organize the transmission of different types of information in the GSM network. A multiframe consists of 26 frames for full-rate channels or 52 frames for half-rate channels.
• Superframe: A superframe is a combination of multiple multiframes, and it is used for synchronization and control purposes in the GSM network. A superframe consists of 12 multiframes for full-rate channels or 24 multiframes for half-rate channels.

The GSM frame structure is designed to efficiently utilize the available time and frequency resources in the GSM network, allowing multiple users to share the same frequency channel and ensuring reliable transmission and reception of information.

17. Explain frequency and channel specifications in IS-95.

IS-95, also known as CDMA2000, is a cellular communication standard based on Code Division Multiple Access (CDMA) technology. It uses a spread spectrum technique to allow multiple users to share the same frequency band simultaneously. The frequency and channel specifications in IS-95 are as follows:

• Frequency Band: IS-95 operates in the 800 MHz band in North America and parts of Asia, and in the 1900 MHz band in other regions. The specific frequency bands allocated for IS-95 vary by country and regulatory authorities.
• Carrier Frequency: In IS-95, the carrier frequency refers to the center frequency of the CDMA signal. The uplink and downlink carrier frequencies are separated by a fixed frequency offset known as the frequency offset or frequency reuse factor.
• Forward Channel: The forward channel in IS-95 is used for communication from the base station to the mobile device. It consists of multiple physical channels, including the Pilot Channel, Sync Channel, Paging Channel, and Traffic Channels. The Pilot Channel provides the reference signal for coherent demodulation and channel estimation. The Sync Channel carries synchronization information for mobile device acquisition. The Paging Channel delivers paging messages to mobile devices, indicating incoming calls or messages. The Traffic Channels are used for transmitting voice or data.
• Reverse Channel: The reverse channel is used for communication from the mobile device to the base station. It also consists of multiple physical channels, including the Access Channel and Traffic Channels. The Access Channel is used for initial access and registration of mobile devices. The Traffic Channels are used for transmitting voice or data.
• Channel Bandwidth: In IS-95, the channel bandwidth refers to the bandwidth allocated for each channel. The channel bandwidth for the forward and reverse channels is typically 1.25 MHz.
• Spread Spectrum: IS-95 uses Direct Sequence Spread Spectrum (DSSS) modulation technique, where each user's signal is spread over a wide bandwidth using a unique pseudo-random code. This allows multiple users to share the same frequency band and be separated by their unique codes.

By utilizing CDMA and spread spectrum techniques, IS-95 provides efficient utilization of the available frequency spectrum and allows for increased capacity and improved signal quality in cellular communication systems.

18. Explain the following blocks of the forward CDMA channel modulation process:

• i) Long PN sequence: A binary sequence generated by a linear feedback shift register (LFSR) with a large period, unique to each base station, used for spreading the user's data signal before transmission.
• ii) Data scrambler: Randomizes the user's data before spreading it with the Long PN sequence, ensuring the transmitted data appears as random as possible to reduce correlation with interfering signals.
• iii) Power control subchannel: Used for controlling the transmit power of the mobile devices, carrying power control bits that indicate whether the mobile device should increase or decrease its transmit power.

These blocks are essential for the proper modulation and transmission of signals in the forward CDMA channel, ensuring efficient use of the available bandwidth and maintaining the desired signal quality.

19. Explain power control in CDMA. Also, explain briefly the open-loop and closed-loop mechanisms in power control.

Power control in CDMA (Code Division Multiple Access) systems is a technique used to regulate the transmit power levels of mobile devices to maintain a desired signal quality at the receiver. It plays a crucial role in achieving efficient spectrum utilization, maximizing capacity, and minimizing interference.

In CDMA, each user is assigned a unique spreading code to separate their signals in the frequency domain. However, due to the near-far effect, where users at different distances from the base station experience different path losses, the received signal strengths at the base station can vary significantly. Power control mechanisms help in equalizing the received signal strengths to ensure a balanced system operation.

There are two main mechanisms of power control in CDMA:

• Open-loop power control: The mobile device adjusts its transmit power based on a predefined power control scheme, without explicit feedback from the base station. The transmit power level is determined by factors such as the distance between the mobile device and the base station, the path loss, and the required signal-to-interference ratio (SIR).
• Closed-loop power control: A feedback-based mechanism where the mobile device adjusts its transmit power based on explicit power control commands received from the base station. It utilizes a power control feedback loop to continuously monitor the received signal quality and make necessary adjustments to the transmit power.

Closed-loop power control provides several benefits, including improved system capacity, reduced interference, and extended battery life for mobile devices. It enables adaptive power control based on real-time channel conditions, allowing the system to dynamically respond to changes in the environment and user mobility.

In summary, power control in CDMA is essential for maintaining the desired signal quality in the presence of varying path losses and interference. Open-loop power control sets an initial transmit power level based on predefined parameters, while closed-loop power control continuously adjusts the transmit power based on feedback from the base station. Together, these mechanisms help in optimizing system performance and enhancing the efficiency of CDMA communication.

20. Draw the block diagram and explain the reverse IS-95 channel modulation.

The reverse IS-95 channel modulation is the process of modulating the user's data signal in the reverse direction, from the mobile device to the base station, in a CDMA (Code Division Multiple Access) system. Here is a block diagram and an explanation of the reverse IS-95 channel modulation:

```

User's Data Signal -> Data Encoding -> Channel Coding -> Interleaving -> Spreading -> Modulation -> RF Transmission

```

1. User's Data Signal: The user's data signal represents the information that needs to be transmitted from the mobile device to the base station. It can be voice, data, or any other form of digital information.

2. Data Encoding: The data encoding block processes the user's data signal to convert it into a suitable format for further processing. This may include converting analog voice into a digital format or performing digital-to-digital encoding for data signals.

3. Channel Coding: Channel coding is performed to add redundancy to the user's data signal, which helps in error detection and correction. Forward Error Correction (FEC) codes such as convolutional codes or turbo codes are commonly used in CDMA systems. The channel coding adds extra bits to the data signal.

4. Interleaving: Interleaving is a process that rearranges the coded data bits to reduce the effects of burst errors. It helps in spreading the errors caused by fading or interference over a larger time interval. Interleaving ensures that consecutive bits in the original data signal are spread apart in the coded and interleaved data.

5. Spreading: Spreading is a key step in CDMA modulation. It involves multiplying the interleaved data signal with a unique spreading code assigned to the user. The spreading code is a long pseudorandom noise (PN) sequence that spreads the user's signal over a wide bandwidth. Spreading allows multiple users to share the same frequency band by providing a unique signature for each user.

6. Modulation: The spread data signal is modulated onto a carrier frequency for transmission. In IS-95, Quadrature Phase Shift Keying (QPSK) modulation is commonly used for the reverse channel. QPSK modulates the spread data signal onto the in-phase (I) and quadrature (Q) components of the carrier, allowing for efficient transmission of two bits per symbol.

7. RF Transmission: The modulated signal is then upconverted to the desired radio frequency and amplified before transmission through the reverse channel. It is transmitted over the air from the mobile device to the base station using an antenna.

The reverse IS-95 channel modulation process allows multiple users to transmit their spread and modulated signals simultaneously over the same frequency band. At the base station, the receiver demodulates the received signals, performs despreading using the corresponding spreading code, and decodes the data to recover the original user information.

This reverse channel modulation scheme enables efficient and simultaneous transmission of multiple user signals in CDMA systems, providing improved capacity, robustness against interference, and flexible resource allocation.

21. Explain Bluetooth terminology, technologies, and features.

Bluetooth is a wireless communication technology that allows devices to connect and exchange data over short distances. Here's an explanation of Bluetooth terminology, technologies, and features:

Terminology:

• Bluetooth: The wireless technology itself, providing a standardized method for devices to communicate wirelessly with each other.
• Bluetooth device: Any device equipped with Bluetooth technology that can establish a wireless connection with other Bluetooth devices.
• Bluetooth pairing: The process of establishing a secure connection between two Bluetooth devices, involving exchanging security keys or PIN codes to authenticate and encrypt the communication.
• Bluetooth profile: Defines the functions and features that a Bluetooth device supports. Different profiles enable specific applications, such as hands-free calling (Hands-Free Profile) or stereo audio streaming (Advanced Audio Distribution Profile).

Technologies:

• Bluetooth Classic: Also known as Basic Rate/Enhanced Data Rate (BR/EDR), the original Bluetooth technology designed for short-range wireless communication between devices.
• Bluetooth Low Energy (LE): Also known as Bluetooth Smart, a power-efficient version of Bluetooth designed for applications with low energy consumption requirements.

Features:

• Wireless Connectivity: Allows devices to connect to a network without physical cables, enabling mobility and flexibility.
• Simultaneous Connections: Bluetooth devices can establish multiple simultaneous connections, such as a smartphone connected to a wireless headset and a smartwatch at the same time.
• Compatibility: Bluetooth technology is standardized, ensuring compatibility between different Bluetooth-enabled devices from different manufacturers.
• Security: Incorporates security features like encryption and authentication to protect data transmission and restrict unauthorized access.
• Profiles and Applications: Define specific features and functionalities for different applications, such as hands-free calling, audio streaming, and connecting keyboards and mice.
• Interference Mitigation: Uses frequency hopping spread spectrum (FHSS) to mitigate interference from other wireless devices operating in the same frequency range.

Bluetooth technology has become pervasive in various consumer electronics, automotive systems, healthcare devices, and home automation applications. It provides a convenient and reliable means of wireless communication, facilitating seamless connectivity and data exchange between devices.

22. What is ZigBee technology? Explain its features and technical specifications.

ZigBee is a wireless communication technology designed for low-power, low-data-rate applications, especially in the field of wireless sensor networks and control systems. It is based on the IEEE 802.15.4 standard and operates in the 2.4 GHz ISM (Industrial, Scientific, and Medical) frequency band. Here's an explanation of ZigBee technology, its features, and technical specifications:

Features:

• Low Power Consumption: Designed for applications that require low power consumption, allowing devices to operate on battery power for extended periods.
• Low Data Rate: Optimized for low-data-rate applications, typically ranging from 20 to 250 kbps, suitable for intermittent data transmission.
• Mesh Networking: Supports mesh networking, where multiple ZigBee devices can form a network topology, providing enhanced reliability and coverage.
• Self-Healing and Self-Organizing: ZigBee networks can automatically reconfigure themselves in the event of device failure or changes in the network topology.
• Low Complexity: ZigBee devices are relatively simple and cost-effective to implement, making them suitable for mass deployment.

Technical Specifications:

• Frequency Band: Operates in the 2.4 GHz ISM band, a license-free frequency band available worldwide.
• Data Rate: Supports data rates ranging from 20 kbps to 250 kbps, depending on the specific application requirements.
• Communication Range: Typically up to 10-100 meters, depending on factors such as signal strength, interference, and the presence of obstacles.
• Network Topology: Supports both star and mesh network topologies, allowing for flexible network configurations.
• Security: Provides built-in security features, including encryption, authentication, and access control mechanisms.

ZigBee technology finds applications in various domains, including home automation, building automation, smart metering, industrial control and monitoring, healthcare monitoring, and environmental sensing. Its low-power, low-data-rate capabilities, along with its mesh networking and self-configuring features, make it well-suited for deploying large-scale wireless sensor networks and control systems.

23. Explain Wi-Fi architecture and features.

Wi-Fi, which stands for Wireless Fidelity, is a wireless communication technology widely used for local area networking and Internet access. It operates based on the IEEE 802.11 family of standards and allows devices to connect wirelessly to a local network or the Internet. Here's an explanation of Wi-Fi architecture and its features:

Wi-Fi Architecture:

• Wi-Fi Devices: Consist of wireless routers or access points (APs) and Wi-Fi-enabled client devices such as smartphones, laptops, tablets, and IoT devices. The wireless router acts as a central hub that connects the client devices to the network and provides access to the Internet.
• Wireless Router/Access Point: Connects to the wired network infrastructure and serves as a central point for wireless device connectivity. It broadcasts Wi-Fi signals, allowing client devices to connect and communicate with each other and the Internet.
• Wi-Fi Channels: Operates in the unlicensed frequency bands, such as 2.4 GHz and 5 GHz, divided into multiple channels. The number of available channels and their bandwidth depends on the specific Wi-Fi standard being used.
• Service Set Identifier (SSID): A unique identifier that distinguishes one Wi-Fi network from another, appearing as the name of the Wi-Fi network when scanning for available networks on a client device.
• Wi-Fi Modes: Support different operating modes, including Infrastructure Mode and Ad-hoc Mode. In Infrastructure Mode, client devices connect to a central access point or router. Ad-hoc Mode allows devices to directly communicate with each other without a central access point.

Features:

• Wireless Connectivity: Allows devices to connect to a network without the need for physical cables, enabling mobility and flexibility in device placement and network access.
• High Data Rates: Offers data rates, ranging from a few Mbps to several Gbps, depending on the Wi-Fi standard being used, allowing for fast data transmission and supporting applications such as streaming media, online gaming, and large file transfers.
• Security: Employs various security measures to protect data transmission and network access. Encryption protocols such as WPA2 (Wi-Fi Protected Access 2) or WPA3 provide secure authentication and encryption of data.
• Range and Coverage: The range and coverage of Wi-Fi networks depend on factors such as transmit power, antenna design, and the presence of obstacles, typically reaching tens to hundreds of meters.
• Roaming: Supports seamless roaming, allowing devices to maintain network connectivity while moving between different access points within the same network.
• Interoperability: Wi-Fi devices are designed to be interoperable, connecting and communicating with each other regardless of the manufacturer or model.

Wi-Fi technology has become pervasive, with widespread deployment in homes, businesses, educational institutions, public spaces, and other environments. Its convenience, high data rates, and compatibility make it a popular choice for wireless networking and Internet access.

24. Draw and explain the WAP architecture.

The WAP (Wireless Application Protocol) architecture is a framework that enables the delivery of wireless information and services on mobile devices. It allows users to access and interact with internet-based content through their mobile devices. Here's an explanation of the WAP architecture:

WAP Architecture Components:

• Mobile Device: The user's endpoint in the WAP architecture, equipped with a WAP-compatible browser or client software.
• Wireless Network: The mobile device connects to the wireless network, which can be a cellular network, Wi-Fi network, or other wireless communication infrastructure.
• WAP Gateway: Acts as an intermediary between the mobile device and the internet, responsible for translating and adapting content from internet-based servers to a format that can be displayed on the mobile device.
• WAP Proxy Server: Part of the WAP gateway, receives requests from the mobile device, fetches the requested content from the internet, and performs necessary adaptations and optimizations before delivering it back to the mobile device.
• WAP Application Server: Hosts the WAP applications and services accessed by the mobile device, processing user requests and sending responses back to the mobile device via the WAP proxy server.
• Internet Server: Hosts the content and services that the mobile device accesses, such as web pages, images, videos, or other types of data.

WAP Architecture Flow:

1. User Request: The user initiates a request on the mobile device by selecting a WAP service or entering a URL. The request is sent from the mobile device to the WAP proxy server via the wireless network.
2. WAP Proxy Server: The WAP proxy server receives the user request and acts as an intermediary between the mobile device and the internet. It processes the request, performs necessary content adaptation, and forwards the request to the internet server hosting the requested content.
3. Internet Server: The internet server processes the request received from the WAP proxy server. It retrieves the requested content or performs the required actions and generates a response.
4. WAP Proxy Server: The WAP proxy server receives the response from the internet server. It further adapts and optimizes the content to suit the capabilities of the mobile device.
5. Mobile Device: The adapted response is sent back to the mobile device via the WAP gateway and the wireless network. The mobile device's WAP browser or client software receives the response and renders it for display to the user.

The WAP architecture enables mobile devices to access and interact with internet-based content through a simplified and optimized interface. It allows users to browse websites, access web-based services, send/receive emails, and perform various other tasks using their mobile devices. The WAP gateway and proxy server play a vital role in adapting and delivering content to suit the limitations of mobile devices, providing an efficient and user-friendly experience.